The problem is going from mains voltage to 3.3v means some sort of waste heat. Rewiring the whole house to 12v is one idea I've seen, but again, total house rewire and fixture replacement. In the mean time, it's A9 bulbs with LED electronics going from 120v to 3.3v generating heat. Making cheap electronics means that heat will kill the electronics. Making good electronics at a higher retail price is the solution, but consumers are not educated enough so all they see is sticker shock.
Your comparison of USB-A to USB-C is nonsensical and does not actually acknowledge the issue of why the existing screw in bulb direct replacement have issues
12V is too high for your LEDs, you still have the power supply. 12 volts is not near enough voltage for a house. You can get around it with very big wires but copper is extremely expensive. Even in cars, 12 volts is borderline. Trucks are fairly often go to 24 or higher voltage because even at the size of a large truck (semi), higher voltage is an advantage.
Well, we can certainly argue with 110 or 220 is a better voltage for a house. It is quite clear that 12 volts is too low.
It doesn't need to be for the whole house, it just needs to be for the lighting fixtures. Obviously nobody is going to use a microwave or blender on 12V. It's not like our bulbs plug into NEMA 5-15 outlets. Having good DC standard voltages and plugs would be incredibly useful. Don't bother running 12V everywhere, but like after the 120V light switch go to a single controller that then drives the lights for that room. Or have that be in the box with the switch, although that might still have the same kind of cramped heat issue.
And it's not like we need to just stop producing Edison socket styles tomorrow. But let's make sane standards today.
12v blows over any form of distance.
Screw-in sockets are more durable and long-lasting than any replacement so-far, most of which have been replaced again (remember those weird fluorescent mini-bulb sockets?).
The LEDs themselves also produce heat.