The thing that blows me away is it does this at one quarter the total parameter count of K3 (and 40% active parameter count). There's plenty of room at the bottom.

> How are you all toying with running this kind of thing in a mega quantized way locally?

Sure, let me answer that in excessive detail. I briefly tried running the UD IQ3_S quant of GLM-5.2, which is 288 GiB of weights (301 GB). Setup was: llama.cpp, 1x NVMe SSD (Evo 980), 64 GiB DDR5-5200, i9-13900HX, and 1x RTX Pro 6000. Token generation around 0.7 t/s. Not remotely usable interactively, but something I could plausibly push a codebase into and come back to a review in a couple of days.

There's potential for that hardware to go much faster, but current local inference backends make poor use of the memory hierarchy. Ideally I would have: always-active weights, KV and hot expert cache in VRAM; warm expert victim cache in host RAM; and disk as a last resort. Instead it's 1/3rd of the layers fully pinned in VRAM (all experts), and 2/3rds running wholly on the CPU with mmap()'d weights. The CPU cores spend most of their time sleeping on disk fills.

llama.cpp has backed itself into a bit of a corner architecturally by trying to support all models on all possible backends. If you look into how their "MoE offload" feature works (not viable for me because it requires enough host RAM to permanently pin the weights) you very quickly realise it's "oops, all bubbles!" due to the static compute graph splits. There are more focused frameworks like DS4 [1] and Colibri [2] which have better support for streaming weights from disk, and support GLM-5.2.

Obviously I wouldn't recommend my setup for huge models like GLM-5.2. Supposedly it can just about be squeezed into 3x GB10, or run comfortably on 4x GB10 (tensor-parallel) for multi-user serving. I'm not sure whether that qualifies as local, but it's at least not a rack.

[1] https://github.com/antirez/ds4

[2] https://github.com/JustVugg/colibri