So the city can't afford to comply with its own regulations, and instead of fixing the regulation, they find loopholes. I wonder if there's a lesson to be learned, here.
So the city can't afford to comply with its own regulations, and instead of fixing the regulation, they find loopholes. I wonder if there's a lesson to be learned, here.
The article says the city claims the biggest issue is federal regulations (the ADA) not city regulations.
My neighborhood in NJ just got those fancy ADA compliant curb ramps last year, along with a repaving. It did take them much longer to install the curb ramps (like a week or two?) than it did to pave (one day) so I can imagine there is a significant cost, even if it's a smaller amount of materials.
One wonders if you could prefabricate kerb ramps and drop them in, rather than (I assume) casting them in place.
Maybe they'd settle badly if vehicles drive over them, kick up in the opposite corners and become a trip hazard.
The UK mostly skirts this by using tarmac and paving slabs instead of concrete.
Very few sites are going to be flat or square. I suspect prefabbed parts mostly wouldn't fit without custom adapters around the edges.
Or make the asphalt "ride up" onto the sidewalk itself, so the complicated part is made of asphalt.
Likely this won't be terribly faster, and I did see the company near us using a machine that was building curb cuts directly.
I looked up kerb cutting machines and it's interesting how much of the process is cutting through cast-in-place kerbs with special saws.
There are hardly any of these in the UK, for example, and kerbs are nearly always made of kerbstones that are sunk into the ground. They have their own problems with sinking when driven on, and I imagine frost heave in areas where the ground freezes seasonally. But it does mean that a dropped kerb installation is quite quick. Most dropped kerbs are simple tarmac ramps rather than concrete castings here.
The ones I saw didn't actually cut the curb - they had arms that held out the form and "built" them in place. I was surprised, as the still-recent but earlier curb cuts had very obvious examples of actual cuts. It was similar to this, perhaps https://www.curbmachines.com
I wonder if you could just ignore ignore settlement by provisioning for hydraulic slab jacking instead?
Include a built channel for injecting hydraulic grout a few months later once the settlements happened to correct it out.
I don't think there's a way to do this without casting something to connect the pre-fab to the surrounding concrete sidewalk. Like how do you precisely cut out the existing curb so the prefab just fits (including elevation/slope) without excessive gaps or something? And if you're pouring concrete anyway, might as well pour the curb itself.
With prefabs you first dig up both road and sidewalk, set up pre-cut granite curbs (kerbs?) on a mild concrete foundation (negates sinking completely), then repour and repave sidewalk and road. Lasts many years in -20C winters +35C summers climate.
According to the cdc 1 million.people are blind and 7 million people have serious vision impairment.
It would be cheaper to pay 60k a year per blind person to hire them a full time guid for waling outside.
Ok, but curb cuts also positively impact wheelchair users, people with canes or walkers, people with injuries that require crutches or a knee scooter, parents with strollers, people with rolling bags, cyclists, delivery workers and more. They are widely understood to benefit many many people beyond just people with disabilities (so much so that their benefit has given a name to the "curb cut effect").
Also, $60k/year is a) not nearly enough to pay a contractor full time living wage and b) not enough to cover the greater than full time necessary to assist someone. Blind people need to navigate the world at all hours on all days...
Damn. I've been curious what the deal is with the rubber lego knob coverings on sidewalk ramps and here it is. I mostly notice because they're such hell for skateboarding, so it never occurred to me they'd be an ADA thing as I assume they're equally hard to navigate in a wheelchair, but apparently the idea is to provide a tactile warning that the street is nearby for people with vision impairments.
> because they're such hell for skateboarding, so it never occurred to me they'd be an ADA thing as I assume they're equally hard to navigate in a wheelchair
Why do you think so? Even the front wheels of wheelchairs are much larger than those of skateboards, and their main wheels typically are pneumatic (front ones, too, probably, but cheaper ones might skimp on that)
>I mostly notice because they're such hell for skateboarding, so it never occurred to me they'd be an ADA thing
"Be hell for skateboarding" wasn't likely considered a bonus by the disability people because it would rally "those sort of people" to their (otherwise legitimate) cause.
Typically taxes need to go up 2x to cover the costs. Most infra projects get done with Fed money because cities can't afford it. Also why home developers build the road and then hand it over to the city for upkeep. Its too expensive.
Because after the home is built, city starts getting tax revenue from its occupants
It can easily afford it.
What the city can't seem to do is rid itself of corrupt employees and corrupt practices.
These people talk a big game, but when it comes to basic office management, they're less than worthless.
I wish I could vote to leave the offices empty. I honestly think that would improve things.
I do wonder if a little part of this is, they talk a big game, get into office and then see the details of full picture and realise they over promised.
It is a nice theory but then they bring out the same rhetoric when seeking re-election. So yeah, corruption may be abound.