There was one guy who tested this
https://www.tomshardware.com/pc-components/storage/unpowered...
The data on this SSD, which hadn't been used or powered up for two years, was 100% good on initial inspection. All the data hashes verified, but it was noted that the verification time took a smidgen longer than two years previously. HD Sentinel tests also showed good, consistent performance for a SATA SSD.
Digging deeper, all isn't well, though. Firing up Crystal Disk Info, HTWingNut noted that this SSD had a Hardware ECC Recovered value of over 400. In other words, the disk's error correction had to step in to fix hundreds of data-based parity bits.
...
As the worn SSD's data was being verified, there were already signs of performance degradation. The hashing audit eventually revealed that four files were corrupt (hash not matching). Looking at the elapsed time, it was observed that this operation astonishingly took over 4x longer, up from 10 minutes and 3 seconds to 42 minutes and 43 seconds.
Further investigations in HD Sentinel showed that three out of 10,000 sectors were bad and performance was 'spiky.' Returning to Crystal Disk Info, things look even worse. HTWingNut notes that the uncorrectable sectors count went from 0 to 12 on this drive, and the hardware ECC recovered value went from 11,745 before to 201,273 after tests on the day.
Note that the SSD that showed corrupted files was the one that had been worn out well beyond the manufacturer's max TBW rating (4× the TBW or so). There was a difference of two-to-three orders of magnitude in the ECC count between the "fresh" and the worn-out SSD; I'd call that very significant. It will be interesting to see if there's any update for late 2025.