The voltage ratings of the MOSFETs used for 220/230/240 V applications have been increased over the years.

Decades ago, when bipolar transistors were used, they were rated for 350 V, which is barely enough for 220 V + 10%.

When everybody started to design universal converters usable for 220/230/240 V, the ratings were increased to 400 V. The first power MOSFETs were also rated thus.

Then there were too many converters destroyed by random voltage spikes, so the standard ratings were increased to 500 V. That proved to still be not enough in many places over the world, so the ratings were increased to 600 V or 650 V, already many years ago, in order to make extremely unlikely the destruction of the transistors by voltage spikes much greater than the nominal mains voltage.

600 V or 650 V is used for converter topologies where the transistors see only the peak input voltage. For converter topologies that use fewer transistors, but those see peak-to-peak voltages, the rating of the transistors must be 1200 V.

For 650 V, gallium nitride FETs are the best available devices, while for 1200 V or higher voltages silicon carbide transistors are the best. Silicon transistors are the best only for ratings much lower than 100 V, but they may be preferred also at high voltages for being much cheaper.